Rheonics Inline Viscometer & Density Meter

Rheonics SRV and SRD sensors in Indonesia — supplied and supported by AMG engineers.

RHEONICS DISTRIBUTOR IN INDONESIA

Stop waiting for lab results.

Rheonics SRV and SRD sensors measure viscosity, density and temperature directly in your line or tank, in real time — for Newtonian and non-Newtonian fluids. PT Anugerah Mandiri Globalindo (AMG) supplies Rheonics sensors in Indonesia and supports selection, installation and commissioning.

Both sensors use a balanced torsional resonator immersed in the fluid. The more viscous the fluid, the more the resonator is damped — that gives viscosity. In the SRD, the resonant frequency also gives density. The transducer is hermetically sealed and isolated from the process fluid.

Discuss your application with AMG →

Rheonics Products

Inline process sensors for real-time fluid monitoring.

SRV vs SRD at a glance

Figures from the official Rheonics datasheets. Final selection depends on your application.

SRV – Inline ViscometerSRD – Inline Density & Viscosity Meter
MeasuresViscosity + temperatureDensity + viscosity + temperature
Viscosity range3–3,000 mPa·s standard; options from 0.5 to ≥ 50,000 mPa·s1–3,000 cP standard; wider range available
Accuracy5% of reading standard; 1% availableDensity 0.001 g/cc; viscosity 5% standard, 1% available
Density range–0.0–4.0 g/cc
Process temperature−40 to 285 °C−40 to 285 °C
PressureUp to 1500 bar (by variant)Up to 690 bar standard; options up to 1500 bar
Wetted materials316L or Hastelloy C22316L or Hastelloy C22
Certifications availableATEX/IECEx, EHEDG, 3-AATEX/IECEx, EHEDG, 3-A
Outputs4–20 mA, Modbus RTU, Ethernet/IP, Modbus TCP, Profinet, HART4–20 mA, Modbus RTU, Ethernet/IP, Modbus TCP, Profinet, HART

Source: Rheonics SRV and SRD datasheets.

APPLICATIONS

Where inline viscosity and density pay off

  • Food & beverage: sauces, chocolate, dairy, syrups, sugar concentration
  • Home & personal care: liquid detergents, shampoos
  • Starch & tapioca: % solids monitoring
  • Mining: lime slurry and process slurry density
  • Chemicals & polymers: reaction end-point, blending
  • Inks, coatings & lubricants
  • Fuel and oil quality

Not sure whether inline measurement fits your process? Send us your fluid, temperature and pipe size — an AMG engineer will review your application.

Let’s Discuss Your Application

Our team is ready to help you find the right solution for your process needs.